Disk array messing up boot

[tstormchaser]

I have a Sun x4600 server. Added a SCSI card and connected a Storedge 3320 disk array (JBOD). Once connected, Solaris 10 is trying to boot using any of the disks in the array. My operating system is on the 4600. When I add only one bank of disks (6 disks) it boots fine. When I add the entire array (12 disks) it can't find a boot device. Has anyone run into this before?

 

[bfitzmai]

I have never heard of this before but, have you run probe-scsi-all from the NVRAM ok> prompt to see if you have SCSI ID issues?

 

[djr111]

If you are wanted to know about JFS, you asking the wrong forum, you need to be asking an AIX forum that question

 

[djr111]

sorry posted to wrong thread