bluedragon2
IS-IT--Management
I have a CISCO network configured as follows:
192.9.5 network attached to 2621 CISCO router.
Serial interfaces on the router has 192.90.90 address.
Another router has 192.90.90 serial address attached to the previous router.
Ethernet side of that router is 192.80.4 subnet.
HP Openview discovers all of the IP's on the 192.9.5 network and the 192.9.5 router. It has a light yellow IP symbol for 192.90.90, but will not discover the next router.
How can I get it to discover that router and those behind it.
I can ping these routers.
Thanks
[Blue]Blue[/Blue] [Dragon]
If I wasn't Blue, I would just be a Dragon...
192.9.5 network attached to 2621 CISCO router.
Serial interfaces on the router has 192.90.90 address.
Another router has 192.90.90 serial address attached to the previous router.
Ethernet side of that router is 192.80.4 subnet.
HP Openview discovers all of the IP's on the 192.9.5 network and the 192.9.5 router. It has a light yellow IP symbol for 192.90.90, but will not discover the next router.
How can I get it to discover that router and those behind it.
I can ping these routers.
Thanks
[Blue]Blue[/Blue] [Dragon]
If I wasn't Blue, I would just be a Dragon...