discontinuous cas

[CPKC]

hi
i have bc12 sp5,is it possible to set discontinuous cas signaling with tlp37 or tlp30?
thanks

 

[patcher]

TLP30 can handle discontinuous signalling but not TLP37. Its in VARC-type of signalling.

 

[CPKC]

thanks

 

[CPKC]

Another question.Can i send pulse digits over cas with tlp30?

 

[patcher]

Yes, why not. Its VARO type of digit transmission-decadic pulsing.

 

[CPKC]

yes but i can send only first digit,all other digits are not sent.It is not a public line on other side so can you tell me can i set signals in md110(seizure acknowledge, pts etc.)or how they are set in md110?

 

[TheCurious]

give us a printout of RODAP, ROCAP, RODDP

The Curious

 

[whosrdaddy]

if you use MFC, be sure you have MSU/MRU boards in your system

--------------------------------------
What You See Is What You Get

 

[CPKC]

i will send printouts on monday.
I dont use MFC.
thanks a lot

 

[patcher]

Digit xmission depends on your number length. Probably you need to send enbloc. Set adc=1.... on RODDI then set number length min=max. Your RODAP should match the other system. Be sure you had the system info of the other system.

 

[CPKC]

thats the problem ,other system is an gtd1000 and i do not have information about their setings

 

[patcher]

This will be a problem now. You do not have any information about the other system. You will do it now by means of trial and error method but it will be difficult for you to do it because you don't have means of analysing the fault.