Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Disabling Raid on a Netfinity 7000 M10

Status
Not open for further replies.
spacebass5000

spacebass5000

Programmer
Nov 26, 2000
144
US
How would one go about disabling the RAID functionality on a Netfinity 7000 M10?
 
Sort by date Sort by votes
Remove the RAID controller, then re-attach the SCSI cable (from the backplane) to the onboard SCSI controller. The 7000M10 shipped with an onboard SCSI, not RAID. RAID functionality must be provided via an added card.
 
Upvote 0 Downvote
ok... this is what I thought... And yes, there is a ServeRaid card providing this functionality at present...

Thanks!
 
Upvote 0 Downvote
A word of caution. If you remove the ServeRAID controller, the SCSI controller will not have the data. You will have to restore the complete image from backup. I don't know why you would want to remove the RAID functionality. If it's regarding the "slow" I/O, please read my post about that in the other thread.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Manu_
  • Locked
  • Question
IBM x3650 M3 power on failure
Replies
0
Views
247
Manu_
Manu_
Kiran Angara
  • Locked
  • Question
Hyper-V Internal Network Ping Issue On WS2019
Replies
0
Views
183
Kiran Angara
Kiran Angara
BULOS
  • Locked
  • Question
RECONFIGURATION DE RAID 5 POUR POSITIONNER LE DISQUE DUR SYSTEME DONT LA POSITION A ETE CHANGEE
Replies
0
Views
120
BULOS
BULOS
boristhespider2
  • Locked
  • Question
Azure /intune/Cloud
Replies
0
Views
176
boristhespider2
boristhespider2
PaulMThomas
  • Locked
  • Question
Drive speeds in RAID with Dell external MD1200
Replies
0
Views
128
PaulMThomas
PaulMThomas

Part and Inventory Search

Sponsor

Back
Top