Disabling MSDL

[tomkuk]

Hi,

I need to disable the msdl associated with dch 34 so that I can out the dch as I need to chg the IFC to EURO.
Could you advise how I disable ONLY the msdl associated with dch 34 please? I know in ld 96 but not sure o nthe command for a single msdl?

Thanks.

>ld 96
DCH000
.map dch
DCH 011 : DCIP
DCH 034 : GROUP 01 MSDL 08 PORT 0
DCH 053 : GROUP 01 MSDL 09 PORT 1

 

[GHTROUT]

I think you just want to disable the DCH 34. The MSDL has more than just DCH 34 on it.

>ld 96
DCH000
.dis dch 34


--
Nortel Resources at GHTROUT.com
--

 

[bhassell2000]

you can disable the msdl in ld 96

dis msdl x all

Gene, if it is the last TTY or DCH on the card you have to disable the card to out the application or it give you an error

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[tomkuk]

So "dis msdl 8 all" would disable only the msdl associated with dch 34?

Thanks.

 

[bhassell2000]

from your DCH map yes but I would make sure no TTYs are programmed on it too, ld 22
prt
adan

to make sure

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[tomkuk]

From this I would assume the answer is NO?

ADAN HIST
SIZE 30000
USER MTC SCH BUG
ADAN TTY 0
CTYP SDI2
GRP 0
DNUM 0
DES XSM_MONITOR
FLOW NO
USER MTC
XSM YES
TTYLOG 0
BANR NO
ADAN TTY 1
CTYP SDI2
GRP 0
DNUM 1
DES CUST_&_MAINT'CE
FLOW NO
USER MTC TRF SCH
XSM NO
TTYLOG 0
BANR YES
ADAN TTY 2
CTYP SDI2
GRP 0
DNUM 2
DES RACE_LINE_PORT
FLOW NO
USER MTC SCH
XSM NO
TTYLOG 0
BANR NO
ADAN TTY 3
CTYP SDI2
GRP 0
DNUM 3
DES CALL_DATA_RECORD
FLOW NO
USER CTY
XSM NO
ADAN TTY 4
CTYP CPSI
DNUM 4
PORT 0
DES CPSI_CORE_0
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC TRF SCH BUG
XSM NO
TTYLOG 0
BANR NO
ADAN TTY 5
CTYP CPSI
DNUM 5
PORT 1
DES CPSI_CORE_1



PAGE 001

BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC TRF SCH
XSM NO
TTYLOG 0
BANR NO
ADAN TTY 6
CTYP QSDI
GRP 0
DNUM 6
DES ADMIN
FLOW NO
USER SCH
XSM NO
TTYLOG 0
BANR YES
ADAN TTY 7
CTYP QSDI
GRP 0
DNUM 7
DES CIM
FLOW NO
USER TRF CTY
XSM NO
TTYLOG 0
ADAN TTY 8
CTYP PTY
DNUM 8
PORT 1
DES PTY1
FLOW NO
USER MTC SCH BUG
XSM NO
TTYLOG 0
BANR YES
ADAN TTY 9
CTYP PTY
DNUM 9
PORT 2
DES PTY2
FLOW NO
USER MTC SCH BUG
XSM NO
TTYLOG 0
BANR YES
ADAN ELAN 16
CTYP ELAN
DES ELAN16
N1 512
ADAN ELAN 17
CTYP ELAN
DES ELAN17
N1 512
ADAN DPNSS DCH 10
CTYP SPDC
GRP 0
DNUM 10
DES



PAGE 002

USR DPNSS
ADAN DCH 11
CTYP DCIP
DES VirTrk
USR ISLD
ISLM 4000
SSRC 1800
OTBF 32
NASA YES
IFC SL1
CNEG 1
RLS ID 4
RCAP
MBGA NO
H323
OVLR NO
OVLS NO
ADAN DPNSS DCH 12
CTYP SPDC
GRP 0
DNUM 12
DES
USR DPNSS
ADAN DPNSS DCH 14
CTYP SPDC
GRP 0
DNUM 14
DES
USR DPNSS
ADAN DPNSS DCH 15
CTYP SPDC
GRP 1
DNUM 15
DES IMUK_294789
USR DPNSS
ADAN DCH 34
CTYP MSDL
GRP 1
DNUM 8
PORT 0
DES GVN
USR PRI
DCHL 34
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ISGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE NET
CNEG 1
RLS ID 25
QCHID YES
RCAP COLP
MBGA NO
OVLR NO
OVLS NO
T310 120



PAGE 003

INC_T306 2
OUT_T306 30
T200 3
T203 10
N200 3
N201 260
K 7
ADAN DCH 53
CTYP MSDL
GRP 1
DNUM 9
PORT 1
DES VOIP
USR PRI
DCHL 53
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ESGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
QCHID YES
RCAP COLP NDI
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7

 

[bhassell2000]

it would appear so

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[tomkuk]

Unfortunately I am now getting this error when trying to out the dch?
Assume I need to out the loop too, but not sure on that?

REQ chg
TYPE adan
ADAN out dch 34

SCH4732
ADAN ****
OVL000
>err sch4732
>

SCH4732
Cannot remove the D-channel when B-channel is still defined for loops
associated with this D-channel.

Severity: Info

 

[bhassell2000]

yes, you need to go to ld 14 and out the trunk memebers for that loop, you can go to ld 17 and out the loop in CEQU after the trunks and dch are gone too

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[bhassell2000]

also check that this T1 isn't one of your clocking sources in ld 73


Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell