Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Disable SMB polling on NT 4.0
- Thread starter pgaiger
- Start date
- Thread starter
- #2
- Thread starter
- #4
Terry712,
Thanks for the reply. There is another user in our datacenter that has complained that our box is scanning their machines and filling up their logs. We have closed all NETBIOS (and other uneccessary ports) to the outside of the datacenter, but it is constantly scanning internally.
P
Thanks for the reply. There is another user in our datacenter that has complained that our box is scanning their machines and filling up their logs. We have closed all NETBIOS (and other uneccessary ports) to the outside of the datacenter, but it is constantly scanning internally.
P
You are going to have to be more specific.
Is it PDC to BDC synchronization traffic?
Is it Master brower elections or browse list sharing?
What port is the traffic being seen on?
What messages are filling their logs? Are we talking the NT event logs or logs for some other tool?
Is it PDC to BDC synchronization traffic?
Is it Master brower elections or browse list sharing?
What port is the traffic being seen on?
What messages are filling their logs? Are we talking the NT event logs or logs for some other tool?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
