I have a Citrix 1.8 machine with two NIC cards. One NIC card is for the Network and the other serves as dedicated backup LAN segment for our environment. When I do a qserver from another machine it reports the IP address of the server as the IP address of the backup card not the actual network. Is there a way to disable the second NIC from responding to the request?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Disable Seocnd NIC
- Thread starter oneworld
- Start date
CitrixEngineer
Technical User
I know this can be done in dual-homed W2k MetaFrame servers, but I haven't tried it in NT4 TSE;
1) Disable NIC 2
2) Stop the ICA Browser service
3) Restart the Browser
4) Re-enable the NIC
ICA should now advertise only on the NIC that was active when the service started.
Hope this helps
1) Disable NIC 2
2) Stop the ICA Browser service
3) Restart the Browser
4) Re-enable the NIC
ICA should now advertise only on the NIC that was active when the service started.
Hope this helps
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question