Disable overhead paging

[mracree]

So I need to temporarily disable our overhead paging system. What load do I run to do so? I know the TN is 20 1 9 0. I've tried LD 20 and LD 32 but I don't think I running the whole command properly.

 

[Wanebo]

in ld 20 you should be able to issue disu 20 1 9 0


ld 20
. disu 20 1 9 0

 

[mracree]

So I'm still pretty new at this and I've never received any formal training. When I do a LD 20, it ask for the REQ. It's not a CHG so when I put DISU, it doesn't take, ask for REQ again.

 

[Firebird Scrambler]

It sounds as if you have a very old Meridian Option xx system. Go into LD 32

You will get a "."

key in

STAT 20 1 9 return
(This should print out the ports on the card)

DISU 20 1 9 0 return
(This should disable the first port "0")

STAT 20 1 9 return
(This should show port "0" as being disabled)

ENLU 20 1 9 0 return
(This will enable the first port again)

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin