Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

disable dhcp

Status
Not open for further replies.

agape234

Programmer
Oct 10, 2001
128
US
How do I disable the "Boot-up" DHCP daemon. I want to assign a static IP/Mask/Gateway but at every reboot my settings are replaced with the DHCP acquired settings?

Are YOU Sancho?....No you are not. Is Scott Baio Sancho?....NO, he is not!....Only.."I"....am Sancho!
 
Perhaps by moving or removing /etc/dhcp.*.

You will also need to add the static IP address and host name to /etc/hosts, put the hostname in /etc/hostname.int0 where "int0" is the interface name, and put the network and netmask in /etc/netmasks if they aren't there already.

You could also try sys-unconfig as described in this thread: thread80-62539 Annihilannic.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top