DISA Feature Code

[grinchstyle]

Hi Guys,

Is there an official list of the Feature Codes for DISA?

I have configured all the parameters and when I dial in, I get a dial tone but not sure which feature code to enter. The call drops as soon as I enter more than two (2) values.

From ALEX, its like this...

DISA number DT * FC * AUTH.CODE # DT Wanted number

I have set the AUTH CODE but what is this FC?

Thanks!

 

[doktor]

Yes, that exists!

Dial til DDI number for DISA:

And then:
*75*extension number * auth code #

New dial tone is heard.

And then:

*10*extension number * profile number to activate #

(Turns your PELPI on)

or:

#10*extension number #

Profile number (PELPI) to de-activate (turn off).


///doktor

 

[grinchstyle]

Thanks but unfortunately, it is still not working. I am using a common authorization code (1001) for the DISA number (230).

Here is AUCOP output:

<?AUCOP:AUTH=ALL;
AUTHORIZATION CODE DATA
AUTH CODE CILCOD CAT CSP CHECK CUST
1001 230 1 NO
4417 85852 2 NO
7144 85851 1 NO

From ALEX, I see that with common authorization code. it should be...

DISA number DT * FC * AUTH.CODE # DT + Wanted number

FC will be 75? The call simply hangs up when I try

DT*75*1001#

I get no dialtone

 

[whosrdaddy]

common authcode FC = *72*code#

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[grinchstyle]

Thanks!