Directory was not found, or could not be accessed.

[dparrott]

Hey all,

We're using BE 10 on server 2003 std. Everything was going fine until about a week ago, when the installs started running really, really slowly. We tried getting new drivers, but the syamantec website doesn't have (or we cannot find) the drivers for 10 anymore (we tried the ones for 11, but it screamed that we didn't have Backup Exec installed). However, we did solve the speed issue by restarting the server Backup Exec runs on.

On Thursday night (which was slow, and on Friday, which ran at the normal speed), we started getting this message.
"Network control connection is established between 192.168.1.11:4317 <--> 192.168.1.201:10000
Network data connection is established between 192.168.1.11:4319 <--> 192.168.1.201:1785
Directory was not found, or could not be accessed.
None of the files or subdirectories contained within will be backed up.
Directory was not found, or could not be accessed.
None of the files or subdirectories contained within will be backed up.
Network control connection is established between 192.168.1.11:4317 <--> 192.168.1.201:10000
Network data connection is established between 192.168.1.11:4320 <--> 192.168.1.201:1792
Directory was not found, or could not be accessed.
None of the files or subdirectories contained within will be backed up.
Directory was not found, or could not be accessed.
None of the files or subdirectories contained within will be backed up."

I checked the remote agent on the servers, and it's running on both
Any help would be greatly appreciated.

 

[dparrott]

No one has any helpful ideas about this?

Thanks,

Danny