Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Directly selecting a specific CO line

Status
Not open for further replies.

bigdave1980

Systems Engineer
Dec 18, 2017
192
GB
Hello everybody,

Just a quick question, I used to know the answer to this but I have lost some of my older documentation owing to a systems change at work. I cannot for the life of me remember how you pick up a specific CO line on an IP-LDK 300 system. The particular system I'm looking at has 4 analogue lines in an aux group. I know there's a simple series of buttons or feature code you can press in order to directly select line 1, line 2 etc without having to press CO line keys on a handset but I can't remember how to do it. I've trawled the manual and the web but strangely I can't see anything about it, potentially because I'm not searching on quite the correct terminology.

If somebody could please jog my memory that would be great!

Thanks!
 
Hi Dave,

I believe the coding is 88xxx, so to select from a SLT or DKT - CO Line 10 88010 etc.,

Cheers, Matt
 
@Triphase10

Hi Matt, thanks very much for that. I've been advised by the end user that their issue has been resolved by their line provider so I don't need to get them to try this any more, but I will retain the information for future reference.

Cheers,

Dave
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top