Direct Inward Dial - ISDN

[tim080772]

Hi guys (and girls if there are any in the forum)

I have just finished setting up a basic single LIM MD110 with BC 7.2 (Yes I know it's old, its for my test lab). The problem I have now is that the system terminates every incoming DID number on the attendant console. NADAP looks fine as do all the route settings, can anyone point me in the right direction to find whats missing?

Many thanks in advance.
Tim Russell

http://www.russellweb.co.uk/nortel

 

[Rou5]

Hi
You can check following settings.!!
opcgs , Operator call origin group set
opcts, Operator call type data set
RODNI Route day and night number initiate

here is some example, listing from md bc 7.2
CALENDAR DATA
VERSION=FIBC7.2A/CORR3
11:50:42
05 JUL 2002
<OPDDPIR=ALL;
OPERATOR DIRECTORY DATA
DIR EQU OCUST TYPE
890 001-0-10-00 - 1
<OPCTP:CORG=ALL;
OPERATOR CALL TYPE DATA
CORG CALT ROU OACC CUST NDIR RERNUM CEN
1 1 - 9 - N - N
2 2 - 9 - N - N
3 3 - 9 - N - N
7 7 1 311 - Y 490 N
<OPCGP:CORG=ALL;
OPERATOR CALL ORIGIN GROUP DATA
DIR
8
9
0
CORG -
1 1
2 1
3 1
7 1
<RODNP:ROU=ALL;;
ROUTE DAY AND NIGHT NUMBER DATA
ROU TRU DAY NIG
1 9 490
<NADAP:NUMTYP=OC&OD;
NUMBER ANALYSIS DATA
TYPE OF SERIES NUMBER SERIES
OPERATOR COMMON NUMBER SERIES 9
OPERATOR COM. DID. NUM. SERIES 311

Obs. nig and day settings.
!!test these...

 

[GuauGuau]

Have tou checked NUTRP; settings? If B-number conversion isn't correct, calls could be rerouted to operator console.
You should check traffic matrix (TCMAP:CON=T too.
Good look!

 

[tim080772]

Thanks for the answers. I believe the problem was with the ISDN30 setup. I have now routed the ISDN to the Lab Meridian and instigated a QSIG link between the Meridian and the Ericsson, this works fine. I'll go back to the original setup when I can get someone to reconfigure the ISDN30 for me.

Tim Russell

http://www.russellweb.co.uk/nortel

 

[tim080772]

So I've got it working now, here is the config:

ROCAP (ROCAI / ROCAE)
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
2 111000000700 5 0000030111 0 30 128 00151515 111110000030 1111

RODAP (RODAI to initiate)
ROU TYPE VARC VARI VARO FILTER
2 SL60 H'00000300 H'00000000 H'04010000 NO

This is for a Dutch EuroISDN30. Tim Russell

http://www.russellweb.co.uk/nortel