Direct diversion

[serg75]

Hi!
May I make so that the calls were diverted from my DTS only in the case if DTS is free? The calls must be redirected at once, not after the delay. In case I talk on DTS, "user busy" should be displayed.
I heard about tandem calls, but I don't know - by means of what commands it realized.
Whether also it is possible to call 2 telephones simultaneously?
Is it work in BC10/11/12?
Thaks for you answers.

 

[kings1]

Serg75,

You can make a cdini on your DTS to a diversion position.

Diversion on no reply:
*211# activate
#211# deactivate

Diversion on BUSY:
*212# activate
#212# deactivate

Use the MNS function on the second telephone to ring on two telephones simultaneously.

Kings

 

[serg75]

Hi kings1!
Let's see what happen in situation your described. If I make CDINI from ext.# 2222 to 3333 and in 2222 I deactivate diversion on busy (#212#), then alerting signal will go on 2222 first and after several seconds - on 3333. That's not right - I want that call left at once.
Well, if I make an direct diversion (*21#) then alerting signal will go right away on 3333. But in this case, the checking on "busy" is not made i.e. if in this moment I talk by telephone, then the person, who want ring me to 2222, will be switched on 3333 (my mobile phone or something else).
Why during talk my second telephone rings: I can not talk on two telephones simultaneously?

 

[soaplover]

Hi there !
Try this:
PELPI:LIST=1,CHO=1,ANSPOS=2222,BSYCHO=3,TIME=2;
PELPI:LIST=1,CHO=2,ANSPOS=3333,TIME=20;
PELPI:LIST=1,CHO=3,ANSPOS=2222,TIME=20,BSYCHO=0;

It will ring on 2222 when idle in 2.secs (min value) .
then it will go to 3333 .
If 2222 is busy it will goto cho=3 WITH BSYCHO=0 , then
tha caller will receive busy tone and deflection is finished.
If you don't want to hear the initial 2.sec ring tone in dts-2222 ,use the prog key to program calalt #2
(ringing after delay) .

Soaplover

 

[serg75]

Hi soaplover!
Your schema looks like CDINI and #212#.
PELPI much more flexible than CDINI. But whether I can decrease a minimum spacing period from 2 seconds up to 0?
Nobody will answer so long as the call will not be readdressed - it is not necessary to wait for 2 seconds.

 

[soaplover]

2 secs is the minimun value for the time parameter .
Regarding comparsion wwith CDINI .
You stated that you wanted the call to ring at 3333
when 2222 is idle .(with the pelpi you almost get this (2.secs) . And if busy on 2222 it will give the caller busy .

You can't acheive this combination with cdini .
Either div no answer to 3333 (15 or 8 secs before 3333 is called) , or with direct diversion direcly on 3333 but then calls when 2222 is busy will also go to 3333 .

The Pelpi i suggested is the nearest you can get .

//Soaplover