Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
direct cable connection
- Thread starter Iamuser
- Start date
Hi,
Do you have the correct cable ?. Have you used the DCC wizard ?.
If yes to the above then check that both computers have their LPT ports setup correctly in the BIOS.
If they are setup correctly (ECP,EPP etc)then is your software correct (laplink, DCC etc)
In any event check out
Rgards
Do you have the correct cable ?. Have you used the DCC wizard ?.
If yes to the above then check that both computers have their LPT ports setup correctly in the BIOS.
If they are setup correctly (ECP,EPP etc)then is your software correct (laplink, DCC etc)
In any event check out
Rgards
Guest_imported
New member
- Jan 1, 1970
- 0
If still problems, try individual loopback check on each LPT port with something like CHECKIT. This will verify your ports are ok.
ROGER - GØAOZ.
ROGER - GØAOZ.
- Status