Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Digits Displayed

Status
Not open for further replies.

ccastillo

IS-IT--Management
Dec 5, 2001
155
US
We have our Opt. 61C (r25) set to display our main number and not our DID numbers when we dial out directly from our offices

Ex. our DID range is from 6000 - 6999 but when we make an external call our DID is not displayed. We display our main local number of 123-456-7890 (sample number). This way we are not giving out our extensions/direct numbers to our offices.

I know there is a table (LD) you can go into in order to change what is sent out when making the calls. For example we have a few VPs who want to make sure people know when they are calling (whatever). So when they dial someone externally there name actually appears on the receiving phone.

Does anyone know what LD to go into and the proper syntax?

Thanks In Advance,
 
REQ: prt
TYPE: clid
CUST 0
SIZE 256
RNGE
INTL 10
ENTRY 0
HNTN
ESA_HLCL 51274
ESA_INHN NO
ESA_APDN YES
HLCL 51274
DIDN YES
HLOC
LSC

You change this in LD 15 in the NET_DATA block.

let me know if this helps.

john
 
Thanks for the quick response but what LD do you do the print in?

Thanks,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top