Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Digital Trunks DTI2 go into LOCKOUT state
- Thread starter daniel26
- Start date
This is usually from telco.
Try bouncing them and see if they com back normal.
If it is DTI as opposed to PRI, you can try removing the RJ45 from the smart jack and putting a loopback on it. Your T's should come back up completely green and idle. If that is the case then it is definitely a problem farther out (In other words TELCO).
Try bouncing them and see if they com back normal.
If it is DTI as opposed to PRI, you can try removing the RJ45 from the smart jack and putting a loopback on it. Your T's should come back up completely green and idle. If that is the case then it is definitely a problem farther out (In other words TELCO).
- Status
Similar threads
- Locked
- Question
- Locked
- Question