Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Digital set server

Status
Not open for further replies.
telcodog

telcodog

Technical User
Jan 1, 2007
1,443
CA
Have a new Digital Gateway connected. Both the UCx and the Gateway are updated to current levels. I can access it, program the sets on the UCx but under the process status box in the Gateway, I can't get the digital set service to start and the status light on the BCM is flashing green. The Call server IP address in the DG is correct too.

Any idea what I'm missing? Tried both software and power off reboots but it still refuses to startup.
.
 
Sort by date Sort by votes
It turned out to be bad Hardware. We were unable to load the firmware into the DSP. Sent a new DG
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

telcodog
  • Locked
  • Question
Digital gateway certificate
Replies
2
Views
148
telcodog
telcodog
MoJHK
  • Locked
  • Question
Where to set the digit "9" for outgoing calls in Emetrotel UCX250
Replies
3
Views
108
ucxguy
ucxguy
MoJHK
  • Locked
  • Question
Setup Avaya 1416 feature keys in Emetrotel 2
Replies
7
Views
214
RegAlphTom
RegAlphTom
MoJHK
  • Locked
  • Question
Setup a SIP trunk from UCx250 to IPO500V2 errors 1
Replies
7
Views
187
curlycord
curlycord
mrdom
  • Locked
  • Question
Setting up follow me ... problems ...
Replies
6
Views
243
mrdom
mrdom

Part and Inventory Search

Sponsor

Back
Top