Digital Mobility Service Kit Pinout

[lewmar]

Hi,
Could somebody help me with pinout of the serial cable, which is a part of the Digital Mobility Service Kit.
Thank you.

 

[SupportDude]

I think its just a null modem cable.
Pins 2 & 3 reverse on one side.

-SD-

http://www.mysupportguy.net

 

[lewmar]

Serial cable for that kit has DB9 connector on one side and RJ-11(2 pair) on another. It connects to Digital Mobility Repeater via Y-splitter, together with 9V power supply. You need it to program the repeater.

 

[gberger]

Not really a null modem cable, in fact only 2 wires are connected from the 6 conductors line cord (white and blue)to a printed board circuit with many diodes,resistors and ic's then connected to the DB9 connector(all pins used).
You better order it, part number is NT7B65LL.

 

[curlycord]

http://www142.nortelnetworks.com/techdocs/BCM_OD_37/pdf/N0000623_01_dmsicg.pdf

Page 92

 

[lewmar]

Thank you!