Digital link alarm

[motard]

I would like to know if somebody could help me with an alarm which appears when I display the alarm log. I have a MX CONTROLLER with BRI CARD, three of them are linking towards a NERIS PBX, and the other one is linking with a GSM TRUCK, when I make test individually ( holding each link individually I obtein traffic correctly, but the alarm log show me that the links are bad, at least it is what I believe), please somebody can tell something in order to this.
Thanks before hand.

Here you are a logout of the alarm log:



Category Name Alarm Level Total Unavailable% Minor Threshold Major Threshold Critical Threshold
Digital Links Major 5 20 - >0 -


----------------------------------------------------------
| | | Total |
| Cab Shelf Slot | Card Description | Faults |
----------------------------------------------------------
| 6 1 3 | MC274Ax Basic Rate Interfac | 1 |
----------------------------------------------------------
Location | Device | State | Owner | ID |Status
------------------------------------------------------------

----------------
6 1 3 1 1| Basic Rate Interfac | Idle | | |
6 1 3 1 2| Basic Rate Interfac | Idle | | |
6 1 3 2 1| Basic Rate Interfac | Idle | | |
6 1 3 2 2| Basic Rate Interfac | Idle | | |
----------------------------------------------------------------------------

 

[MitelInMyBlood]

What happens if you enter the command:

DT CL 6 1 3 1 (note spacing)

i.e., now interrogate your alarms again. Is it still there?

 

[motard]

The alarm dissapear. I have sended the comand:
DT CL 6 1 3 2
The fault was in this PLID, it had SLIPS.
Thanks for your help.