Digital DN to also ring Analogue No with Bell

[clemyp]

Hi there,

I have a Digtal Ext 6045 , I also have a analougue line set up which is connected to a bell 6043.

How Do I make 6043 ring at the same time as 6045?

Basicly I just want two exts to ring when one is dialed.

Many Thanks Paul

 

[JcBWF]

make the bell the same extension as he digital.

Perfection is expected, Excellence is Tolerated

 

[clemyp]

Sorry to be a plumb,

how do i do that? when I change the DN the other DN changes?

sorry a bit of a novice here

 

[GHTROUT]

If you change 6043 to 6045, then the phone and the bell have become the same number and ring at the same time.






~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[JcBWF]

LD 10
CHG
TYPE 500
TN enter TN of the analog bell
ECHG yes
DN 6045
ENTER THE REST OF THE WAY THROUGH.
Your bell should now ring when the digital 6045 rings.



Perfection is expected, Excellence is Tolerated

 

[clemyp]

Can this be done by the element manager at all?

Thanks again

 

[johnpoole]

build the new phone with a unique dn (analog) then change the dn.. yes you can do it in tm, not em

john poole
bellsouth business
columbia,sc

 

[clemyp]

Thanks Guys, hopefully the last question

TM - Telephone Manager? where do I get this, I was told our BCM would have all the software we needed on the switch itself, I can not see this on there?

Thanks again

 

[GHTROUT]

You mean you have a BCM? No wonder - We don't do BCMs in this forum. We do Meridian1 and CS1000


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]