digit lost over mcdn from attandant

[bpg1]

i have just opgrade and opt 51c to cp4 25.15,after this when the att. transferac all to another node and the call comes back digit in the ext are lost,all patche are in and i know that the problem was ajuste in cp2,but patche for cp4 seems not to work.

 

[fritzthecat]

Hello bpg1,
ist that your problem?

Digits missing on att when the call came back using MCDN
PROBLEM DESCRIPTION:
The display of the attendant shows only the two last digits
of the five that compose the DN. Example :
the DN is 50599 and the attendant shows 99.

HARDWARE AND DATA SETUP:
Two nodes A and B.
On node A :
Running on release 2347.
- incoming trunk from the CO.
- an attendant.
- an MCDN route to be connected with node B.

On node B :
- a MCDN route to be connected with node A.
- a set.

Configuration of node A is attached to the PRS.
the MCDN route has :
SIDO ESN5
CDR YES
CDRX NO
ACTION:
An incoming call coming from the CO is route to the
Attendant.
The attendant transfers the call to the set on node B using
the MCDN route.
The set on node B does not answer.
The call comes back on the attendant.
If CDR is not configure on the MCDN route there is no
problem.

EXPECTED RESULTS:
the display of the attendant shows the DN of the set B.
(50599 or H50599, I do not know)

ACTUAL RESULTS:
the display shows 99, only the two last digits.

If that is your Problem, be shure, that mplr11531 is installed

 

[bpg1]

hello

mplr11531 are installed did not help,but mplr11531 in cp2 ok,but not in cp4.thats the problem.