different ring on internal/external calls

[coniglio]

i don't think this is possible and so far haven't found any info indicating it is, but I need to know whether I can program one of my M3904s to ring for attendant-extended external calls and to only flash for direct internal calls. If I can't do this is there any way to set different ring tone (or, even better, buzz tones) for internal/external calls? Thanks in advance for your help.

 

[Supportvzla]

This is the way we have programmed in our pbx:
1.-In LD 56 We programmed the NDR1:

TYPE FTC
TABL 1
NCAD 001
NBCS
XTON 002
DCAD 002
DBCS
XTON 002
ICAD 005
IBCS
XTON 002
RCAD 001
RBCS
XTON 002
GCAD 001
GBCS
XTON 002
HCAD 003
HBCS
XTON 002
PCAD 001
PBCS
XTON 002
XCAD 000
NDR1 PBX 004
NDR1 BCS
XTON 029
XCAD 029
NDR2 PBX 002

2.-In the Rout we assign the NDRI (DRNG Yes)

NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
OPCB NO
DRNG YES
NDRI 01
CDR NO

3.Probably not neccesary, this is the way our phones are programmed:

CAC_MFC 0
CLS TLD FBA WTA LPR PUA MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSA-CSI SWD LNA CNDA
CFTD SFD MRD DDV CNIA CDCA MSID DAPA BFED RCBD
ICDD CDMA LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHD FITD CLTD ASCD
CPFA CPTA ABDD DELD CFHD FICD NAID BUZZ
UDI RCC HBTD AHA IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD CCBD RTDD RBDD RBHD PGND OCBD FLXD FTTU DNDY DNO3 MCBN
FDSD NOVD
CPND_LANG ROM
RCO 0
HUNT 000

This way external calls sound different than internal
NOTE: We have one phone in which the first key (key 0) is SCN (no sound)and the number of the extension is not included in the numeric plan for external calls, besides the LHK is 0. He uses this key for internal calls.
The extension he has in key 1 (SCR) is used for external calls.

Supportvzla

 

[coniglio]

thanks for all the info Supportvzla. I'll read up on LD56 on Monday.