Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Different Night Messages

Daniel_RO

Technical User
Sep 29, 2020
107
AU
Hey Guys,

Have a customer with emG80, theyre wanting 4 different messages and being able to select them independently from a handset before they leave for the night. They have recorded said messages from the

trans/pgm 0, 6,
002,
and using messages 1-4,

however when going through this process each night, and selecting the 1-4 and pressing hold, it doesn't change the message that is played, it continually plays the same message despite which one is selected, which appears to be message 2.

Anyone know what I am missing here?
 
I would use system call routing (pgm 251) to steer the incoming call to each message. Record greeting 002, 003 004 005 then assign each to a scenario group (15 available) with the corresponding incoming did number, tick all in day, set time to 0000 to 2359, set active. Use dnd 5 and the scenario number to activate from Attendant.
 
Did some testing and have managed to make the above work. Thanks Cody64 for this. Wasn't even aware this was an option in the system. Gives me another feather for my cap, and I can use it moving forwards too. Pity we cant do a flex key to select the different modes.
 

Part and Inventory Search

Sponsor

Back
Top