DID's on the Merlin Legend 6.1

[chuck95]

I have a customer that wants me to move their system. They now have 6200-6299 DID numbers and extensions 200-299. In the new location they are having 2100-2199 DID's. Will I have to change the extension numbers or can I just point the new DID's to the extension I want them to ring to? Thanks in advance.



Chuck Berg
Performance Telecom

http://www.performancetele.com

chuck@performancetele.com During Hours
me@chucks-web.com After hours

 

[merlinman]

When you say D-I-D, you can have 4 kinds.

Two way D-I-D over T1 or Tie Line Mods, Regular D-I-D thru D-I-D mods, OR Two Way D-I-D over PRI.

With the first 3, what you get is what you have. That is, if they send you 100-199, then you have got to renumber your extensions to match.

If it is PRI, you can point them anyway you want, just about.

 

[TouchToneTommy]

With regular copper DID's, couldn't you delete one digit and add a "2" to make it work with the current extension numbers?

 

[tech4ultimate]

Any type of DID whether analog/digital can be manipulated on the Magix/Legend.
In this case strip 21 and append 2....or change the dial plan which is usually the way to go.

 

[merlinman]

Tell me how you can do that with T1 E&M Tie Lines sold as 2-Way D-I-D, (I am assuming what you are referring to as DIGITAL) 'cause I have yet to figure out how to do that.

 

[Ghostin]

you can only add/delete digits on the analog one way DIDs and under PRI. If you are using two-way DID's accross a T-1, you have to have what they are sending you.