DID'S Inbound digit manipulation.???

[fyrman]

Hello all! I have a customer with a new PRI and 10 channels in. He also has 3 digit dialing 110 thru 160. His new did range is 3040 thru 3063.

Can i take the 30xx number in
delete the 30
add a 1
and have it route to 1xx
when i work with the incoming routing table which end deletes the left or the right? here is what i have.


A 1 2 CallbyCall By Dial Plan

A Channel ID: 8 7 6 5 4 3 2 1

A Line PhoneNumber NumberToSend
A 805
A 806
A 807
A 808
A 809
A 810
õÐ?ÑA 811
A 812

A Network Selection Table

A Entry Number: 0 1 2 3
A Pattern to Match: 101**** 10***

A Special Service Table

A Entry Number: 0 1 2 3 4 5 6 7
A Pattern to Match: 011 010 01 00 0 1
A Operator: none none none none none none none none
A Type of Number: I I I N N N N N
A Digits to Delete: 0 0 0 0 0 0 0 0

A Call-By-Call Service Table

A Entry Number: 0 1 2 3 4
A Pattern 0: 0
A Pattern 1: 1
A Pattern 2: 2
A Pattern 3: 3
A Pattern 4: 4
A Pattern 5: 5
A Pattern 6: 6 F€K?
A Pattern 7: 7
A Pattern 8: 8
A Pattern 9: 9
A Call Type: BOTH BOTH BOTH BOTH BOTH
A NtwkServ: No Service
A DeleteDigits: 0 0 0 0 0

A Entry Number: 5 6 7 8 9
A Call Type: BOTH BOTH BOTH BOTH BOTH
A NtwkServ:
A DeleteDigits: 0 0 0 0 0  êI“^? Dial Plan Routing Table
A PRI INFORMATION



A Entry Number: 0 1 2 3
A NtwkServ: Any service Any service Any service Any service
A Expected Digits: 4 4 4 4
A Pattern to Match: 7213 1384 7421 7226
A Digits to Delete: 4 4 4 4
A Digits to Add: 140 7124 7125 141

A Entry Number: 4 5 6 7
A NtwkServ: Any service Any service Any service Any service
A Expected Digits: 4 4 4 4
A Pattern to Match: 7218 7214 3045 3041
A Digits to Delete: 4 4 4 4
A Digits to Add: 143 144 301 141

A Entry Number: 8 9 10 11
A NtwkServ:
A Expected Digits: 0 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add:

A Entry Number: 12 13 14 15
A NtwkServ: Any service Any service Any service Any service
A Expected Digits: 4 4 4 4
A Pattern to Match: 3040 3044 3043 3063
A Digits to Delete: 4 4 4 4
A Digits to Add: 140 144 143 889

This works fine, however i would like to have it be system wide for the did range (3040--3062) 3063 for remote.

thanks
ron

 

[SYQUEST]

Why not just make the stations four digits! That would be the easy way, since I see you have some now.

....JIM....

 

[memphisribs]

expect 4, match 30, delete 2, add 1: should work, or change to 4 digit extention numbers or even better ask for a different DID range that the 3rd digit is not a 9 or 0.

lots of luck

45 years in the business and counting.