DID to TA Box 1

[imeldesign]

NEC 2000 IPS and Neax 64 VM
Is it possible to make a DID number go directly to a transaction box? I already have TA box set up for a menu line but instead of going through the auto attendant they want a direct number to the weekly fellowship meal menu.

If so, I am assuming I follow these steps:
7600> xxx: yyy

xxx = DID number
yyy = number conversion block number
zzzz = extension

7601> yyyy:zzzz (this command is for DAY mode)
7602> yyyy:zzzz ( this command is for NIGHT mode)

 

[belevedere]

Create a virtual extension to match the DID, match it to a TBox. CFA the virtual to the VM pilot. It will go to the TBox.

 

[imeldesign]

Thanks for the reply,
Not sure what you mean with create a VE to match DID...all extensions start with 2XXX but DID is XXX-XXX-8652.
Then match it with TBox?
The CFA I get...

Can this all be done remotely. I actually live in another state but I can dial in to the system and use MOC mode.

 

[belevedere]

VE is a virtual extension built in CMD 11. Pick an unused LEN 0000-1020, then assign it as the DID (EX;8652) extension.EX:11>0000>8652. Then call forward 8653 to the VM pilot number. This will send the ID to the VM. If the TBOX is the same number, 8652, then it will play that greeting.
Make sure that 8 is allowed as extension numbers in CMD 200.
EX: 200>8>804

 

[imeldesign]

Eight is not an allowed extension number. All my virtual ext begin with 25XX. All TBox begin with 30XX

Step One Create Virtual Extension in MOC:

F9 11 F8 000 F8 and keep pressing the Enter key until you reach a LEN that says NONE.
Then simply type in the new extension 25XX followed by F2.

Step Two Change the extension number of the DID (number has been assigned before but isn't used now)
F9
7600 F8
DID digits 652 F8
-you will get a conversion block number

F9
7601 F8
enter the conversion block number F8
enter the station number you want the DID to go to F2

Do the same in CM7602

Step Three - ??not sure how to match it to the TBox 3060.

 

[Fixin]

Step 1: make your virtual ext be 3060.
Step 3: f9
E600 f8
3060 f8
Voice mail pilot number f2
This all call forwards DID to TA box.

 

[imeldesign]

Great...didn't know if I could make an ext and a TBox the same number..they will love this. Thanks.