Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Did somebody try Ericsson DT290 with M1 Dect ?
- Thread starter rtycka
- Start date
hi,
I know that Dt288 works, BUT it has one by me known problem.
That is that the ericsson system brings the extension number to the handset automaticaly.
The Meridian system can't do that so it gives a random number in the upper right corner of the display.
It is basicaly the same with DT570 BUT if you enter a system name with seven letters or more it will disapear.
That doesn't happend on the DT288. So that is a problem.
I have actually a lot of sites using DT570 in Meridian dect systems now. It is both DMC4 and DMC8 systems.
It seems to work fine and only small problems are noted.
The companion phones like 4020 and 4050 gives a lot more problems.
What I have seen in DMC4 systems is that if you have a to new software on the DMC4 cards it could black-out the display on the DT570 sets.
Se to that you have the latest software on the DT570 sets.
I think it is R3A.
A nice software for the DMC4 cards could be 45000206.
If you install 45000405 or so, it could be a problem, but check and see. It could also be dependant on the software on the pbx.
Remember, if you use other handsets then nortels own handsets you will not get any help from them.
But why not, Nortel doesn't have any handsets wich is made to use in warehouses and such, only for office use..
I know that Dt288 works, BUT it has one by me known problem.
That is that the ericsson system brings the extension number to the handset automaticaly.
The Meridian system can't do that so it gives a random number in the upper right corner of the display.
It is basicaly the same with DT570 BUT if you enter a system name with seven letters or more it will disapear.
That doesn't happend on the DT288. So that is a problem.
I have actually a lot of sites using DT570 in Meridian dect systems now. It is both DMC4 and DMC8 systems.
It seems to work fine and only small problems are noted.
The companion phones like 4020 and 4050 gives a lot more problems.
What I have seen in DMC4 systems is that if you have a to new software on the DMC4 cards it could black-out the display on the DT570 sets.
Se to that you have the latest software on the DT570 sets.
I think it is R3A.
A nice software for the DMC4 cards could be 45000206.
If you install 45000405 or so, it could be a problem, but check and see. It could also be dependant on the software on the pbx.
Remember, if you use other handsets then nortels own handsets you will not get any help from them.
But why not, Nortel doesn't have any handsets wich is made to use in warehouses and such, only for office use..
- Thread starter
- #4
hi,
thanks for reply
I have also some experience with DT570 and 288 ,but my problem is subscribing this DT290 to M1 DECT system .
story
M1 o11 rel.24.40B
DMC8 with 47000207 firmware
software on the DT290 I have to check
I was try several times to enter the PIN to the phone ,also separate with *, but the msg. was always "subscription failed".
I have the same experience with nortel handset like you.
The basic thing is CALL, if it is doesn't work all other features are unnecessary.
thanks for reply
I have also some experience with DT570 and 288 ,but my problem is subscribing this DT290 to M1 DECT system .
story
M1 o11 rel.24.40B
DMC8 with 47000207 firmware
software on the DT290 I have to check
I was try several times to enter the PIN to the phone ,also separate with *, but the msg. was always "subscription failed".
I have the same experience with nortel handset like you.
The basic thing is CALL, if it is doesn't work all other features are unnecessary.
- Thread starter
- #5
here is some info from other channel
>I can not subscribe a DECT phone in a Nortel DECT system
>I try to subscribe a DECT phone in Nortlel DECT system but >the phone will not be subscribed.
>Solution
>Different GAP implementations
>It has been noticed on some occasions that DECT phones >will not be subscribed to an "alien" DECT system, that >wrong extension number is shown after subscription or that >the A-number presentation will not work in the portable.
>It is very important to test the behavior of the cordless >phone (DT288/DT290/DT570/DT4x0/DT4x2 etc) before a phone >is sold to an alien DECT system. This because different >vendors have in some cases different implantations of the >DEC standard.
>Ericsson only guarantees correct function when our >cordless phones are used with the MD110, Businessphone or >the Radio Exchange DECT systems. In all other cases it is >up to the partner to decide whether or not a DECT phone >can be sold to the system.
>I can not subscribe a DECT phone in a Nortel DECT system
>I try to subscribe a DECT phone in Nortlel DECT system but >the phone will not be subscribed.
>Solution
>Different GAP implementations
>It has been noticed on some occasions that DECT phones >will not be subscribed to an "alien" DECT system, that >wrong extension number is shown after subscription or that >the A-number presentation will not work in the portable.
>It is very important to test the behavior of the cordless >phone (DT288/DT290/DT570/DT4x0/DT4x2 etc) before a phone >is sold to an alien DECT system. This because different >vendors have in some cases different implantations of the >DEC standard.
>Ericsson only guarantees correct function when our >cordless phones are used with the MD110, Businessphone or >the Radio Exchange DECT systems. In all other cases it is >up to the partner to decide whether or not a DECT phone >can be sold to the system.
- Status
Similar threads
- Locked
- Question
- Question