DID RINGING IN NIGHT MODE

[iwant750]

I HAVE A 0X32 WITH DIDs SETUP FOR EACH EXTENSION. DURING NORMAL RINGING MODE THE DIDs RING CORRECT INTO THE PROGRAMMED EXTENSION. HOWEVER IN NIGHT RINGING ALL DIDs ARE PICKED UP BY THE AUTO ATTENDANT INSTEAD OF RINGING AT THE PROGRAMMED EXTENSION. ANY SUGGESTIONS?

 

[rlsabin]

Remove the control set for all the target lines that you dont want answered by auto attendant. Also make sure that you do this when the system is not in night service.


Rick

 

[cook1082]

If you are going to use night ringing for future programming you change the line you want to be in the service to ring group 2, you do this because all the lines default to RG 1 then you don't have to remove the RG from every target line.