DID range across point to point

[RYLSFAN]

I havea BCM400 that is up and working great. I have a block of 50 DID coming into it. We are adding a BCM50 to a remote location and will tie them together with a point to point T1. Anyone know what it is going to take for a call to a direct number on the 400 to ring on and ext off the 50?

ex: 555-1234 is received by the 400 and needs to access a trunk on the p2p and ring an ext on the 50.

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[vztech]

Create a destination code or codes & a Route to the tie line so when the call comes in it will send it straight across the tie line. ( EX. 123A, 124A,125A, )

Then you will need to create Target lines on the BCM50 to recieve the digits.

It's only dialtone-VZ