DID on an 824

[mcrackin]

I have a product catalog that says that the DID will work on an 824 with DR4 or higher. But I have no indication in the DR5 manual. Is it possible to have DID on a 824 if so what documentation or manual update is there? Any help would be great.

Thanks in advance,

Richard S. McCranie
CoMatrix Southeast
richm@comatrix.com

 

[MarvO1]

Yes, you can install DID trunk carts in a trunk module. Each DID cart will support 4 copper DID trunks. Works quite well.
The installer guide covers the installation of DID, including the wiring chart. DR-4 installer guide part number A0389272. Dr-5 installer guide P0803625. Both cover it well.

MarvO said it

 

[ty0004]

does anyone have the dr5 installer guide in .pdf?

 

[PERRYPJ]

Don't think you will find, when 8x24 was around they still had paper

OLD ROLMEN WORKING ON NORTELS