DID Media Bay Module

[Dasheen]

What DIP switch settings do I follow? Do I use the ones for a GATM? Can the new DID card share the same bus as the GATM?

 

[acewarlock]

It would help if you told us what system and Rls. What new DID Card?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[gberger]

Yes the ADID4 and ADID8 uses the same dip switches as a GATM or GATM8. You'll find them in the BCM 4.0 Installation Checklist And Quick Start Guide.
They don't mention if they can use the same bus but my guess is yes. Try it and let us know.

 

[Dasheen]

thx gberger.

 

[norstarboy125]

that's the first that iv'e heard of DID media bay modules when did they come out?

 

[Deweyhumbolt]

I first saw about 4-5 months ago.

Adversity is Opportunity

 

[acewarlock]

You can Google them and there about $1000




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[Dasheen]

GBerger:

Just to let u know I got it working on the same bus as the GATM. The only issue I had was not being able to change from loop to DID when I installed it on bus 7 offset 3. Once I changed it to 7 offset 2 all was ok.

 

[gberger]

Good to know, i'll remember it.