DID Configuration at hiPath 4000 V6

[RICHTz]

How to configure DID for external station,

when use AMO rufum there is an error that this number for external station,
also for AC WIN operator how configure its DID,

Thanks All

 

[sbcsu]

You can use RUFUM for external station.

Just add a 'float number' in Call Progress State (CPS) 6 only
which is incoming only

for example:

ADD-WABE:2345,,6,STN,N;

ADD-RUFUMID,1234,2345;

Then you can forward 2345 to whereever.

Can you post the results of your RUFUM ?


For ACWIN

ADD-WABE:2345,,,ATNDDID,N;
ADD-VFGKZ:ATNDGR,2345,,6,0;

 

[RICHTz]

Thx SBCSU but this configuration still have erros as below

For AC WIN DID
ADD-WABE:CD=3511,DAR=ATNDDID,CHECK=N;
REG-VFGKZ:ATNDGR;
H500: AMO VFGKZ STARTED
H10: THERE EXIST A CONFIGURATION WHICH CAN NOT BE DISPLAYED / DELETED BECAUSE
OF CURRENT SETTINGS OF AMO-ZAND. TO DISPLAY / DELETE THIS CONFIGURATION,
THE PARAMETER COMP1000, BRANCH ATND HAS TO BE CHANGED BY MEANS OF
AMO-ZAND. IT CONCERNS THE FUNCTION > 1000 COMPANY NAMES
ADD-VFGKZ:ATNDGR,3510,,6,0;
ADD-VFGKZ:ATNDGR,3511,,6,0;
ADD-VFGKZ:ATNDGR,0,,5,0;
ADD-VFGKZ:ATNDGR,0,,8,0;
ADD-VFGKZ:ATNDGR,0,,9,0;
ADD-VFGKZ:ATNDGR,0,,10,0;
ADD-VFGKZ:ATNDGR,0,,11,0;
ADD-VFGKZ:ATNDGR,0,,12,0;
ADD-VFGKZ:ATNDGR,0,,22,0;

AMO-VFGKZ-111 ADMINISTRATION OF ATTENDANT GROUP DIALING CODES
REGENERATE COMPLETED;
<

<ADD-RUFUM:TYPE=DID,DID1=7114,DID2=3511;
ADD-RUFUM:TYPE=DID,DID1=7114,DID2=3511;
H500: AMO RUFUM STARTED
F01: STNO 3511 IS NOT A STATION NUMBER (AMO WABE)
DID2 =
AMO-RUFUM-111 DIRECT INWARD DIALLING NUMBER CONVERSION
ADD TERMINATED;
<

<ADD-RUFUM:TYPE=DID,DID1=7114,DID2=3510;
ADD-RUFUM:TYPE=DID,DID1=7114,DID2=3510;
H500: AMO RUFUM STARTED
F01: STNO 3510 IS NOT A STATION NUMBER (AMO WABE)
DID2 =
AMO-RUFUM-111 DIRECT INWARD DIALLING NUMBER CONVERSION
ADD TERMINATED;
<

For External Station
ADD-WABE:3511,,6,STN,N,,,,,,,,;
CHANGE-WABE:3511,200,,,,,,;

<ADD-RUFUM:TYPE=DID,DID1=6112,DID2=3511;
ADD-RUFUM:TYPE=DID,DID1=6112,DID2=3511;
H500: AMO RUFUM STARTED
F04: STNO 3511 DOES NOT EXIST (AMO SBSCU)
DID2 =
AMO-RUFUM-111 DIRECT INWARD DIALLING NUMBER CONVERSION
ADD TERMINATED;

waiting your feedback

 

[sbcsu]

Try this:

DEL-WABE:CD,7114,,,STN;

ADD-WABE:7114,,6,ATNDDID,N;
ADD-VFGKZ:ATNDGR,0,7114,,6,0;

Ext:

ADD-WABE:6112,,6,STN,N;
CHA-WABE:6112,200;

Then at external system (Node 200) convert 6112 to 3511

 

[RICHTz]

for external system this the only solution which the another system will make this pattern conversion,
i will try for the attendant and give the feedback,

another question, when i made DSS key for analog station, i can't dial it from the key but when the analog station is busy the DSS key is LED flasher,

thanks MY teacher

 

[sbcsu]

If it is a HiPath ONLY network then all RUFUM conversions are done in the LAST system.

If it is a different system at the end, yes, you can do the conversion.


ADD-WABE:6112,,6,STN,N;
ADD-WABE:3511,,,STN,N;
CHA-WABE:3511,200;

ADD-SCSU:STNO=6112,DVCFIG=ANATE,DPLN=0,ITR=0,COS1=8,COS2=8,LCOSV1=8,LCOSV2=1,LCOSD1=8,LCOSD2=1,COSX=0,SPDI=0,DIAL=VAR,TEXTSEL=ENGLISH,INS=FLOAT,SSTNO=NO,ALARMNO=107,HMUSIC=0,FLASH=YES,DTMFBLK=NO,PMIDX=1;

ADD-PERSI:STN,6112,"FWD->3511";

Nothing in ZIEL
Here is ACTDA Forward

ADD-ACTDA:TYPE=STN,STNO=6112,FEATCD=FWD,CFVAR=STATIONV,DTYPE=CFU,ITYPE=GEN,SI=VCE,DESTNO=3511;

 

[RICHTz]

i think on this solution but i afraid to get a one flex license when add this analog user by Add-SCSU and make forward for him,

ok i will try,

what about your openion regarding the DSS problem, Thx again Sir.

 

[sbcsu]

Hi EngModo

ADD-SCSU:INS=FLOAT,
does not take any flex licence (on a test V6 anyway)...


Standard/Default DSS is 'Direct Station Selection' - it overrides any forwarding or hunt groups to make the phone ring

Please TRY at the DIGITAL Phone
CHANGE-SDAT:STNO=XXXX,TYPE=ATTRIBUT,AATTR=DSSDEST&DSSWOOVR;

 

[RICHTz]

OK, But regarding the DSS key i don't talk about any forwarding or hunt.

i configure DSS key at digital phone for analog station number ,

when i try to call this analog station by the DSS key this message appear (NOTHING STORED)

but when called him by dial analog station number the DSS key LED is flasher thats mean the analog station is busy.

waiting, thanks alot for your support

 

[sbcsu]

Ensure that the DSS key is setup correctly via the AMO TAPRO


or you can press SERVICE then the key to be programmed and set it up that way directly on the phone.

 

[RICHTz]

Did, but still the same

 

[sbcsu]

Can you check to see that the key is setup as DSS and not as NAME
If it is setup as NAME it will work but you will not get the LED on busy

 

[sbcsu]

Can you check the config on Comwin:

REG-ZIELSS,XXXX;

Thanks

 

[RICHTz]

<REGENERATE-ZIEL:TYPE=DSS;
REGENERATE-ZIEL:TYPE=DSS;
H500: AMO ZIEL STARTED
ADD-ZIELSS,1000,9,1001,BD,SLKSTNO;
ADD-ZIELSS,1000,10,1010,BD,SLKSTNO;

AMO-ZIEL -111 DESTINATIONS FOR VARIOUS STATION FEATURES
REGENERATE COMPLETED;
<
yes if configured Name it will be make a call but the LED not flasher but why the DSS for analog station don't work !!!!!!!!!!!!!

 

[sbcsu]

Let me check it out some more.
What version of HiPath ?

 

[sbcsu]

can you please:
DIS-FEASU;
see if DSS is included in 'activated features'
If not then add as follows:

CHA-FEASU:A,DSS;

 

[RICHTz]

the DSS is activated is feasu as below

DIS-FEASU;
H500: AMO FEASU STARTED
ACTIVATED FEATURES

SPDC SPDI HTVCE HTFAX HTDTE OVR FRKN NIGHT
COSXCD COSXKEY DCOSX COSXATND COSXT COSXDP ICPTDID HOTRCL
DND VARCONF TRACE SNR RKNOVR CBK DSS SPLIT
ONHKTRNS PU RSVCO SER RNG WTATND TRACCO LEDSIGN
RELCON AUTOV SYNCANN CDRIC CDROGNW CDROGTR DISCHTR LCRET
POSTBUSY POSTFREE RELOCATE VOICO HTNW PINNW TIMEDREM ATTR
ECFW CPS INCPRIO CALOGOPT CDRE DIRCPCKP DCPA NCT
CDRACC CLIP MOBHFA

DEACTIVATED FEATURES

CRITM LDME DDTES ISTR NOCHRG VMSDP RERING EMOVR
EMRLS DCBB DCBNOA CDRINH DISCHINH DISCHNW PININT XFBACALL
XFBADIAL RCCB MLPP SMARTCRD SILMON
H02: THE FULL EXTENDED CALL DETAIL RECORDING (CDRE) IS ACTIVATED.

AMO-FEASU-111 CUSTOMER FEATURE LIST
DISPLAY COMPLETED;


take care from when i'm dial the analog station the dss key led is flasher.!!!!!!!!!!!!!!

 

[sbcsu]

OK Now I remember, I think you have a Version 3 ??
I came across it before on that version.
DSS would not work until you REG everything to do with phone, delete and add back in.
It takes a software upgrade to fix it permanently.

What version do you have ?

Comwin
Macro
Retrieve system variant

Thanks

 

[RICHTz]

HicomLanguage=English
<DISPLAY-VEGAS:LIST=SHORT,UNIT=SWU&ADS;
DISPLAY-VEGAS:LIST=SHORT,UNIT=SWU&ADS;
H500: AMO VEGAS STARTED
SYSTEM NO. AMO APS NO. START USER STATUS
SWU: NO-ENTRY-IN-DBASE --- P30252B4800B00101 00.00.00 00:00 NOBODY FREE
ADS: NO-ENTRY-IN-DBASE --- P30252B4800A00101 00.00.00 00:00 NOBODY FREE

AMO-VEGAS-111 ADMIN. OF DATABASE GENERATION RUNS ON SUPPORT SYSTEM
DISPLAY COMPLETED;
<DISPLAY-APS:TYPE=PSGL,SP="Y0-*";
DISPLAY-APS:TYPE=PSGL,SP="Y0-*";
H500: AMO APS STARTED
ADINIT STARTED
PROGRAM SYSTEM : Y0-E30YC
VERSION NUMBER : 60
CORRECTION VERSION NUMBER : 001
PART NUMBER : P30252N4801B00012|V6 R1.12.0
PROGRAM SYSTEM WITH CODE SUBSYSTEMS
INTERFACE VERSION:
PROGRAM SYSTEM DOES NOT CONTAIN ANY INTERFACE VERSIONS

DIR SUBSYSTEM | | OMF SUBSYSTEM
-----------------------+-+-----------------------
ZMITSC00.Y0-EM0.10.001 |*|ZMITSC00.Y7-PMT.10.001

ADINIT COMPLETED
STATUS = H'0000
AMO-APS -111 SOFTWARE LOAD UPGRADE
DISPLAY COMPLETED;
HicomVariantEx=V6 R1.12.* (HicomVariant=UV6.0-SA14)

 

[sbcsu]

V6 R1.12.0
Is a 'bit' behind now
and indeed any version with a dot zero at the end has no patch packets installed
to fix 'bugs' like these

Hotfix (patch packet) number 74 has been released for this version,
that is a lot of patches!

There is a patch included that looks like the problem you are experiencing
MSC24397 PS70873 (HV6.1) I23334 Wrong DSS led in busy state (anate) CP/Feature Problem



Also you need to
ADD-ANUM & ANSU
if you have removed them


You can download patch packet 74 and send it to the HiPath, however there are also Loadware fixes, Unixware Fixes and Other fixes like CSTA if you are using them.

If it was me:
I would start again with the latest release of Version 6