DID card and Analog

[plshlp123]

I have a MICS T-1 RLS 1 0X32 what do I need in regards to adding a DID card to this? And if I want analog port I guess I also need an analog trunk card? I already have 4 DS cards.

 

[RYLSFAN]

if you want to add DID there are two ways. Use a T1 or use DID cards. Using a T1 you might have to change your signal from the LEC, while using DID cards. With 4 DS cards you already have the trunk exp. Keep in mind your DID cards can not be housed in the core(ox32). once the digital trunk is installed you will have to build target lines and assign them to each person that will be using the block of DID. if that part is over your head, you might want to call a vendor.

GL

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[silver987]

Not many dial tone providers offer analog DID anymore, you should check with your vendor to see if they offer DID on analog. Most only have DID over T1.

http://www.silverlakecom.com