DID across VoIP trunk?

[skully1997]

I've got site A (BCM50r2.0) VoIP trunking to Site B (BCM50r3.0). Site A has a PRI and site B does not have any telco service at all. Site B dials out through site A's PRI. I am having trouble setting up a DID to land on an extension at site B. I've got the DID(1875) set up as a destination code going out on a route. That route has access to blocA(VoIP trunks) and is set up as public(unknown). On the site B side i have an Extension(337) with target line to public recieve 1875. Problem is every time i try to call i get a busy signal. I even created a public DN prefix of 1875 and gave it a length of 4. I still get a busy signal.

Can anyone help?

 

[56BelAir]

just create a target line in BCM (A) with recieved DID 1875 digits and redirect the target line to BCM (B). (via your destination site lead digit)
BCM (B) would have a target line to recieve the 1875 digits and assigned to the 337 set.

 

[skully1997]

Thanks 56BelAir,

i guess i was trying to make things harder than it had to be. this was a quick and simple fix, works great! Thanks!