Dialogic Problem

[ISComms]

I have a VRU with a Dialogic D/300 card. I am trying to connect it to a DS1 card using CAS.
Does anyone have a parameter file for the Dialogic card that works?

Many thanks

 

[janney]

This is how I have my DS1 board talking to a Dialogic. It was easier to just show you.


Location: 01B01 Name: SOUNDBYTE 1
Bit Rate: 1.544 Line Coding: ami-zcs
Line Compensation: 1 Framing Mode: d4
Signaling Mode: robbed-bit




Idle Code: 11111111





Slip Detection? n Near-end CSU Type: other



Then create a station "Type: DS1FD" for each channel you wish to use.


STATION

Extension: 2801 Lock Messages? n
Type: DS1FD Security Code: TN: 1
Port: 01B0101 Coverage Path 1: COR: 11
Name: Soundbyte T1C1 Coverage Path 2: COS: 8
Hunt-to Station: Tests? y

STATION OPTIONS
Off Premise Station? y
R Balance Network? n


I don't have a lot of time for threads today but give this a try... and good luck!

 

[ISComms]

thanks janney, but what I am really after is the dialogic .PRM parameter file so that the DS1 cards can talk to the VRU in the same way that other DS1's talk to a Conversant and Nicelog.