Hi All,
I use a PBX Integration Board from Intel D/82JCT-U with the proper cables and breakoutbox. I use ENVOX as CTI Tool and IVR development. I have a problem with port 3 on the D/82 JCT-U Board. The problem is always then I connect a station to this board and I do a first call, it works. The second call to this port blocks the whole Dialogic/Intel Board.
Has somebody see something like this before? I already exchanged the Board but the problem is still there?? Of course change as well the PBX port.
Waititng for your answers!!
I use a PBX Integration Board from Intel D/82JCT-U with the proper cables and breakoutbox. I use ENVOX as CTI Tool and IVR development. I have a problem with port 3 on the D/82 JCT-U Board. The problem is always then I connect a station to this board and I do a first call, it works. The second call to this port blocks the whole Dialogic/Intel Board.
Has somebody see something like this before? I already exchanged the Board but the problem is still there?? Of course change as well the PBX port.
Waititng for your answers!!
