Dial up networking error 629

[timdodgson]

I Have a Connection To Red Hot Ant Which Is A 24/7 Free Connection As Can Guess It Is Al Most always Engaged If I try To Many Dial Ups On The Trot I Get This Error 629 Then what Happens Is When I Try To Dial Up I Get Dialing Tone Then It Cuts Off I Have Checked The Modem Log And Found A Reference To A Blacklisted Number If I Leave For Around 12 hours It Starts Working Again Any Help Would Be Appreciated<br>Thanxs in advance <br>Tim <p>Tim Dodgson<br><a href=mailto:t_dodgson@yahoo.com>t_dodgson@yahoo.com</a><br><a href=

http://www.totalitsolutions.co.uk>

</a><br>

 

[gargoil]

Hello<br><br>You may want to try and turn off Flow Control, Error Control, and Modem Compression. Within the connection itself in Dial-up Networking (right-click on it and select properties) and the Modem.<br><br>Good Luck<br>

 

[timdodgson]

Thanx for the reply i actuly soerted it. I had to do a hardware reset on the modem by one of the following two methods<br>Internal; go to hyperterminal type at&f to reset the modem then at&w to save the settings<br>External; just disconenct the modem from the power supply then reconnect.<br>Many thanxs <br> <p>Tim Dodgson<br><a href=mailto:t_dodgson@yahoo.com>t_dodgson@yahoo.com</a><br><a href=

http://www.totalitsolutions.co.uk>

</a><br>