We use novell 3.2 client. When a user dials in remotely and wants to access their map drives they get the windows logon screen rather then the novell client screen. Their able connect to our LAN, but not access any drives. Is their something you need to do on the client properties, thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dial-up connection
- Thread starter UNIX72
- Start date
Yes, you need to make sure the Novell client is loaded, after the dial in, the user should be able to launch the novell login prompt and it should see the novell network. If it does, great, if not, there is a different issue. I would also recommend that unless there is an NT network on the same lan ie NT servers, to remove the Microsoft client and just have the network properties set to use the Novell client.
Hope this helps
Mark C. Greenwood, CNE
m_jgreenwood@yahoo.com
CNE 4.11 and CNE 5 certified. BS Degree in MIS. Working in the industry for 8 years.
I work with NT servers, NDS for NT as well.
Hope this helps
Mark C. Greenwood, CNE
m_jgreenwood@yahoo.com
CNE 4.11 and CNE 5 certified. BS Degree in MIS. Working in the industry for 8 years.
I work with NT servers, NDS for NT as well.
- Status
Similar threads
- Locked
- Question
- Locked
- Question