Dial-UP Connection Programming

[KnightCoder]

How do i get my VB6 Application to throw up a internet Connection Dial-up box , when i have detected that the user is not connected to the internet.
And also....
How do i make my own dial-up Connection using my own user name , password and Telephone no. directely via with my VB6 Application.
thanks in advance

 

[johnwm]

Look into the MSComm control. You will also need to look up the Hayes AT control command set. You can find several summaries on the net, including this one:

http://www.cellular.co.za/hayesat.htm

________________________________________________________________
If you want to get the best response to a question, please check out FAQ222-2244 first

'People who live in windowed environments shouldn't cast pointers.'

 

[mattKnight]

KnightCoder

catalyst do a good ocx for DUN, It's free and well worth every penny!
Go to

http://www.catalyst.com

and look for socketwrench.

Using the MSCOMM ocx is going top be painful (IMHO)
Take Care

Matt
If at first you don't succeed, skydiving is not for you.