Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

dial tone problem

Status
Not open for further replies.
burak28

burak28

Technical User
Aug 6, 2008
62
0
0
NO
Hi all,

My system is rls 5.0

When phones forwarded to a private mobile network (4 digits) (of an external carrier) and when incoming call comes to one of them, the calling one does not receive any calling tone. This same thing is not happening while phones are forwarded to a mobile (9 digits not included in the private mobile network) number or a national number (9 digits) Tone is provided.

can you please advise ?
 
Status
Not open for further replies.

Similar threads

MoJHK
  • Locked
  • Question
Busy tone after hangup
Replies
1
Views
66
MoJHK
MoJHK
VRRyan
  • Locked
  • Question
Dial 9 for outbound
Replies
8
Views
93
VRRyan
VRRyan
cable_bunny
  • Locked
  • Question
No ringback tone from 81c PABX from Incoming TELCO CO trunk
Replies
4
Views
84
cable_bunny
cable_bunny
Tjets55
  • Locked
  • Question
Expensive Route Warning Tone
Replies
1
Views
42
Firebird Scrambler
Firebird Scrambler
BuffaloBilly
  • Locked
  • Question
Administer Call Pilot via Dial Up Networking
Replies
4
Views
62
BuffaloBilly
BuffaloBilly

Part and Inventory Search

Sponsor

Back
Top