Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dial Plan Routing Table
- Thread starter sammy1563
- Start date
jconrad0305
Programmer
to change that many i think the carrier would need to change them. the merlin only has 16 entries that do this type of thing. so to chage 30 would not work.
ACA & ACS IPO Implementation
ACA IP Telephony
ACA & ACS IPO Implementation
ACA IP Telephony
IS It Possible To input A did range in the dial plan routing table for example 230-260 strip and add change 270-299"
Absolutely! You'll need to match the ranges though... the first is a range of 31 digits, and the second is a range of 30 digits..
In any case, you'll need 3 dial plan routing entries:
Set the "pattern to match" on the first one to 23; set the "delete digits" to 2; set "add digits" to 27; that will take care of 230 to 239; do the same for 24, and 25, adding 28 and 29 respectively... piece of cake, dude!
Absolutely! You'll need to match the ranges though... the first is a range of 31 digits, and the second is a range of 30 digits..
In any case, you'll need 3 dial plan routing entries:
Set the "pattern to match" on the first one to 23; set the "delete digits" to 2; set "add digits" to 27; that will take care of 230 to 239; do the same for 24, and 25, adding 28 and 29 respectively... piece of cake, dude!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
