Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dial plan 3&4 digits by same number

Status
Not open for further replies.

essam2017

Technical User
Feb 5, 2017
15
YE
Hello
In hotel have pbx tda100d v 5.2
Hotel suite 405
Suite contains two rooms
Manger need room1 in suite=4051
Manger need room2 in suite=4052
Can i change the dail plan
Like this
4.....xx
4....xxx
So ...how can do it maybe need to change in hidden menu..to except ..
Thanks...
 
You can’t have 4XXX and 4XX in a plan.

Is it only one room that has 2 phones in it?
Only way to break up a number plan is to set system number plan as 40xx and the rest 41x 42x 43x all the way to 49x. only problem is any 40 numbers will have to have 4 digits.

Do they want to ring each room individually?

 
Can tell me how can activate hotel plan from reserved bit...
 
I have never used that before, does it use the extension interdigit timer control how long between digits it waits to see if you are going to dial 1, 1x or 1xx. I would be concerned of miss dialling if someone is to slow pressing digits
 
Thanks Mike_k 😁...
Can ask u is there document for all options of reserved bits ....like td1232 in program 992...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top