Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dial Peer help please

Status
Not open for further replies.

Eitsalo

IS-IT--Management
Aug 9, 2006
241
CA
I am not sure what happened, It did not let me reply to "whykap" input. Thanks "whykap"

Eitsalo (IS/IT--Management) 23 Mar 11 10:30
Hi All,Below is my PSTN backup dial peer out going 4 digit dialing from remote site to head office. if a user dial 5XXX, how do I substitute this number to 16261234567? Thanks in advance..!dial-peer voice 2000 pots description ** To Head Office (PSTN backup) ** preference 1 destination-pattern 5[0-3].. progress_ind setup enable 3 progress_ind progress enable 8 port 0/3/0 substitute 19051234567 ??????


Check Out Our Whitepaper Library. Click Here.
whykap (Vendor) 23 Mar 11 13:52
You have to use voice translation rules to transform it.

 
Thanks Whypak. Below is my config. and I am having an "Invalid Input Detected" error as soon as I put the port 0/0/0:23

!
voice translation-rule 2011
rule 1 /^5.../ /916061234567/
!
voice translation-profile To_Head_Office_Main_PROFILE
translate calling 2011
!
dial-peer voice 4900 voip
description ** (PSTN backup) **
translation-profile outgoing To_Head_Office_Main_PROFILE
preference 3
destination-pattern 5[7-9]..
port 0/0/0:23 <<<<<<<<<<
!
How do I config the dial peer 4900 above to use T1 please?
Thanks in advance....
 
It has to be a pots dial-peer to point it to a TDM voice port. Change it from voip.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top