I'm having a problem with one of my Legends. The system is an existing system that was purchased with building. I'm trying to get in remotely, but I'm not sure what the password is. Is there a way to initialize the password even if you don't know the existing password. Please help. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dial-in password
- Thread starter eseibert
- Start date
TouchToneTommy
Vendor
You must be on site, and connect directly from your PC's serial port to the admin port. Then you can do a print of the system set up and find the exsisting password.
- Thread starter
- #3
You need some version of SPM software, regular patch cord, and a 355A or 355AF adapter, the only difference is the A is a male and the AF is a female. Also depending upon which adapter you get, you will probably need a 25 to 9 pin adapter, as the 355 adapters are 25 pin.
Charlie Coale
magixtrainer@aol.com
Charlie Coale
magixtrainer@aol.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question