I have centrex lines coming into the MICS 4.1 which require a 9 for dial out access, but when I push intercom I have to dial 9 and then I'm transferred to an available line in my pool and I have to dial 9 again. Does anyone know how I can strip one of those nines off.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dial 9 twice 1
- Thread starter LubbTech
- Start date
-
1
- #2
jerryreeve
Vendor
If you go iinto services and create a route and destination you can have the destination (9) go to route 1 and absorb(strip) all digits, then in route 1 use trunk group a (or whatever you need) and insert a 9.
JerryReeve
Communications Systems Int'l
com-sys.com
JerryReeve
Communications Systems Int'l
com-sys.com
There is a simpler way to do this.Press F*1 press a button
then add 9 as the out digit and it should work since the system would select the default ougoing pool, and you would have a button to call out.Please note that you would have a time delay which should be disregarded and simply dial your out going number as soon as you pres your pool button.
jaco235
then add 9 as the out digit and it should work since the system would select the default ougoing pool, and you would have a button to call out.Please note that you would have a time delay which should be disregarded and simply dial your out going number as soon as you pres your pool button.
jaco235
- Status
Similar threads
- Locked
- Question
- Locked
- Question
