Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Diagnostics

Status
Not open for further replies.

durban56

Technical User
Oct 10, 2006
38
US
Can anyone tell me if there is a way to test (stress test)/ verify/ certify disk and memory in solaris?

For example, say I get a new disk from a vendor and I want to test it block by block; how do I do that?

Same for memory, if I want to do a stress test; how do I do it?

D.
 
You can use the analyze / read commands in format to analyze the disks, or you can use dd to do I/O from the raw disk devices.

For memory you will need a specific programme to exercise it... the Sun VTS package might be what you need, and it will do disk tests as well:


Annihilannic.
 
There's also an option in the OBP Open Boot PROM to test memory. I'm not sure how thorough it is, but it's there and it's free.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top