Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

di-804hv

Status
Not open for further replies.

fireeater

Technical User
Dec 10, 2008
780
have a di-804hv dlink router
was OK and am trying to setup the vpn
but can't access the router but no go
have done factory default (with the reset button)
pc shows as 192.168.0.141 gateway as 192.168.0.1
can't access the gateway address ,can't ping it either
also to 4th port on the router is lit solid ,and nothing is plugged into it, I'm connected to port 1 (have tried all ports)

any ideas what could be happening

thanks

HALLOWED ARE THE ORI

mike
 
plug directly in to the dsl/cable modem. if you get a vaild IP and get to internet, your router could be bad
 
the internet is fine
i just have my pc connected to the router (nothing else )
and can not get into the router (not even ping it)

when i have 2 pc's connected i can see the other pc but not the router itself

HALLOWED ARE THE ORI

mike
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top