I've configured the router to work with my DSL ISP (SNET). I've enable DHCP on the router and I've uploaded the lastest DLINK firmware. I'm able to access the ISP without any problems. When I try to connect to my company's VPN it appears to logon to the network; however, I cannot access any servers.
The PC is running XP Home Edition. I was able to connect to the VPN when I did not use the router. I used RASPPPOE.
I am using CISCO VPN for client 3.5. I've enable NAT on the client software. This did not help.
I've been told that the problem is the CISCO configuration.
Any ideas?
The PC is running XP Home Edition. I was able to connect to the VPN when I did not use the router. I used RASPPPOE.
I am using CISCO VPN for client 3.5. I've enable NAT on the client software. This did not help.
I've been told that the problem is the CISCO configuration.
Any ideas?