chalaka123
Technical User
I have been trying to configure a cisco 1812j router as a dhcp v6 server. I cudnt succeed yet. dont have any problems in dhcpv4 server.
These are the settings Output after the configuration.Could anybody pls check whether any problems are there?
============================================
Router>show version
Cisco IOS software, C181X Software (C181X-ADVIPSERVICEK9-M), Version 12.4(6)T11, RELEASE SOFTWARE (fc2)
============================================
Router# show ipv6 dhcp interface
FastEthernet1 is in server mode
Using pool
ool1
Preference value:0
Hint from client:ignored
Rapid-Commit:disabled
============================================
thanx in advance...
Best regards!
These are the settings Output after the configuration.Could anybody pls check whether any problems are there?
============================================
Router>show version
Cisco IOS software, C181X Software (C181X-ADVIPSERVICEK9-M), Version 12.4(6)T11, RELEASE SOFTWARE (fc2)
============================================
Router# show ipv6 dhcp interface
FastEthernet1 is in server mode
Using pool
ool1Preference value:0
Hint from client:ignored
Rapid-Commit:disabled
============================================
thanx in advance...
Best regards!